Care & Maintenance and Product Information

Care & Maintenance Information
JD-radiantfree.jpg

Maintainance is easy. Simply wash with a soft cotton cloth and warm water, use a mild soap if desired.

DO NOT use abrasive or strong alkaline or acid (high or low pH) cleaners.

DO NOT use or expose to bleach, oven cleaners, Comet®,
Soft Scrub®, SOS®, products with pumice, batteries, paint removers, furniture strippers, tarnish or silver cleaners.

DO NOT use abrasive or harsh scrub pads.

DO NOT apply any sealers, penetrants or topical treatments under any circumstances.

Such products will wear off and cause the gloss to appear dull or inconsistent.

Contact J&D COUNTERTOPS for further information by calling 
905-795-1365.


PRODUCT INFORMATION:

1. Cambria products are pure natural quartz. Variation in the natural stone (quartz) colour, pattern, size, shape and shade are inherent and unique characteristics to be expected with this product. This does not affect the product
performance in any manner.

2. Colour blotches are intended and designed into many colours to enhance the natural beauty. Samples are small select cuts from a slab; they do not exhibit all the characteristics of a colour and therefore are not fully representative of what will be installed. Product will not be replaced due to these variations.

3. Cambria products are durable and more resistant to surface damage than other stone. However, all stone can be damaged by force and no stone is chip-proof. Objects hitting edges particularly at sinks or dishwashers may cause chips. Though a minor knife slip will dull the knife and not harm surfaces, no stone surface is scratch-proof. Surface markings are more visible on monotone colors than multi-colored surfaces.

4. Cambria products are not a seamless product, seams are visible. Where there are seams the product pattern and shade can change.

5. Natural stone surfaces can be damaged by sudden and/or rapid change of temperature especially near the edges, as well as direct and/or sustained heating of the top. Products may not withstand the direct transfer of heat from pots and pans and other cooking units such as electric frying pans and griddles, and some crockpots or roaster ovens and heat lamps. Therefore, the use of a hot pad or trivet is always recommended to prevent heating the top.

6. Products are not a structural support material. 2-cm and 3-cm thicknesses are for countertops and must be supported. 1-cm thicknesses are for surface finishes such as walls, tub and shower surrounds and fireplaces; horizontal applications such as a tub deck must be completely supported as well.

7. Semi-polished or Honed finishes (1-cm) will not shine.